StackerFor Sale Call sales(833) 317-4448

Walkaround video

About this trailer

This inTech 8.5x32 stacker is built on a full perimeter all-tube aluminum frame with a screwless, rivetless .040 aluminum exterior — construction that keeps weight down without sacrificing rigidity. The 16-foot EZ-Load tilting split-rail lift handles up to 6,000 pounds, the extruded aluminum floor and ramp give you a clean, solid surface for loading, and the 11-foot interior height gives you real working room once the car is on the lift. Three Dexter torsion axles with electric brakes on all three handle a 21,000-pound payload rating.

Inside, you get an 8-foot upper-and-lower aluminum cabinet setup with a black HDPE countertop, a carpeted attic with rope rings and a fixed ladder, and a winch plate prepped for a future install. This unit is on order out of Rogersville, AL, and nationwide delivery is available.

Features and build

  • Full Perimeter All-Tube Aluminum Frame
  • Triple Tube Extended A-Frame Tongue
  • Screwless Aluminum Walls & Ceiling
  • .040 Screwless/Rivetless Aluminum Exterior
  • One-Piece Aluminum Roof
  • Flat Roof Design
  • Extruded Aluminum Floor
  • Extruded Aluminum Ramp
  • One-Piece Aluminum Transition Flap
  • Standard 11' Interior Height
  • 8' Lower Aluminum Cabinet with Black HDPE Countertop
  • 8' Upper Aluminum Cabinet with Top-Hinged Doors & Gas Shocks
  • Clear Anodized Cabinet Trim with Slam Latches
  • Light-Duty Attic with Gray Carpet & (9) Rope Rings
  • Interior Fixed Ladder for Attic/Lift Access
  • Aluminum Spare Tire with Wall Mount
  • Winch Plate Prep for Future Winch Installation
  • 4" Upper & Lower Rub Rails
  • Polished Cast Aluminum Corners
  • Stainless Steel High-Polish Front Verticals & Radius
  • Wheel Skirts Around Axles
  • inTech Rear Spoiler
  • 36" ATP Wraparound Stone Guard
  • Loading & Access
  • 16' EZ-Load Tilting Split Rail Lift (6,000 lb Capacity)
  • Low-Profile Lift Posts
  • Rear Ramp Door with Gapless Continuous Hinge
  • Rear Caster Wheels
  • 32" Removable Lift Ramps with Wall Storage
  • 36" 405 Series Entrance Door
  • RV Flush Lock Entry Door Latch
  • Slide-Out Aluminum Entry Step
  • Rear Manual Stabilizer Jacks
  • 2-5/16" Ball Coupler
  • Premium Tongue Package with Safety Chains
  • 4,500 lb Electric Jack
  • Axles, Tires & Wheels
  • Dexter Torsion Axles
  • Electric Brakes on All Axles
  • Spread Axle Design
  • ST235/85R16 Tires
  • Aluminum Wheels
  • Individual Aluminum Fenderettes
  • Electrical & Lighting
  • 30 Amp Load Center
  • 60 Amp Converter/Charger
  • 12V Deep Cycle Battery with Vented Battery Box
  • 12V Fuse Panel
  • 25' Shore Power Cord
  • (4) 120V Interior Outlets
  • (8) 18" 12V LED Cove Lights with Switch
  • (2) 18" 12V LED Attic Lights
  • LED Clearance Lights
  • Dual LED Slimline Tail Lights
  • (2) 12V LED Flood Lights on Curb Side
  • 12V LED Rear Flood Light (Activates in Reverse)
  • 12V LED Light Strip Under Lift
  • Breakaway Battery Kit
  • 7-Way Trailer Plug
  • Storage & Interior
  • (4) 5,000 lb Recessed D-Rings on Main Floor
  • (4) 5,000 lb Recessed D-Rings on Lift Floor
  • In-Floor Hydraulic Lift Pump
  • Underside of Lift Finished with Aluminum
  • 16" On-Center Floor Crossmembers
  • 16" On-Center Wall Studs
  • 16" On-Center Roof Studs
  • Measurements
  • Interior Height: 11'
  • Rear to Cabinets: 27'7"
  • Rear Door Opening: 7'5" H x 7'3" W
  • Height Under Loft: 7'
  • Loft Dimensions: 103" x 97.5"
  • 3 Year Manufacturer's Warranty
  • 5 Year Axle Warranty

Close in size

All stackers